RV Plumbing Supplies

RV plumbing supplies. Some rigs come outfitted with a sprayer for the toilet from the factory. My first rig didn’t, so I added a standard sink sprayer and teed it off of the water supply line to the toilet.

While I used to be down there, I also added a shut off valve to the provision line. This sprayer is helpful to rinse down the inside of the bowl after use. Components needed had been a barbed shutoff valve, a barbed tee with the proper dimension threaded fitting for the sprayer connection, the sprayer, a brush bracket to carry the sprayer head and the mandatory crimp rings.

After leaving my external water pressure regulator behind for the second time, I made a decision to get rid of the problem by installing a Shur Flo regulated metropolis water inlet. This can be a nice little machine and is simple to add to your rig. It regulates the incoming water pressure to a safe forty five-50psi and because it’s attached to the rig, it is harder to go away behind. An additional benefit: This regulator appears to flow extra water than the little brass ones that you just connect to the water spigot. For those of you who would rather have an exterior regulator, in addition they make one set up with hose connectors.

In case you are sad with the low stream charges you are getting via your present regulator, this might be a very good alternative for you. Available from most RV parts stores through the Shur Flo catalog. It is a very helpful item and will make your life lots simpler: It’s a tank flushing system that installs completely into the side of your holding tank and provides an exterior hose connection so as to easily flush your holding tank.

No extra dragging a hose inside to flush your black water tank. I installed one in both my grey and black water tank and I completely love them. The directions are superb and the installation is straightforward sufficient for even the moderately useful person to do. Principally, you’ll need to cut a small gap within the aspect of the holding tank and attach the flusher head utilizing the supplied screws and some silicon sealant.

Then the simple hose extension is run to a handy spot beneath the rig and offers the hookup level to your backyard hose. In case you are in the habit of winterizing your RV with RV antifreeze, this little addition will save you gallons of the pink stuff! Some RVs have
these installed from the factory, however for those of you who don’t have one several totally different manufacturers are available.

What this does is can help you completely bypass the water heater so that once you fill your water system with RV protected antifreeze, you don’t have to fill the entire water heater as well. To bypass the water heater, drain it and then shut the valves on the
heater inlet and outlet and open the bypass valve. Most models are easy to install and don’t require chopping any current plumbing and simply screw onto the present water heater nipples.

One word: In the event you don’t winterize your rig, then there actually is not any motive to install a bypass. Finally, this can be a mighty handy little item: It is a simple stress gauge put in inside the rig to monitor water stress in your fresh water system. It’s very simple to do- simply purchase a regular gauge that may learn from 0 to 100 psi or extra and add a tee wherever in the freshwater plumbing. I added mine right subsequent to the water heater.

In case you are in the habit of not using a regulator, this gauge is an actual necessity. To guard your RV plumbing, you need to by no means expose it to water pressures in extra of 100 psi and truly, you are a lot safer limiting the strain to 45-55 psi. RV plumbing supplies.

Article archive in RV plumbing supplies also see our Plumbing.